Produces tight tolerance IDs, smooth mirror-like finish and improves RMS. Follows existing ID, so frequently used after pullboring.
Pullbore
Enlarges an existing hole. Does not follow the existing ID and produces a very straight hole, due to boring being in tension rather than compression.
Reaming
Used to enlarge existing hole to produce large diameter holes (greater than 8.75 inches – 222 mm)
Skiving
Enlarges the ID of existing holes to produce straight, tight drift tolerance holes. Longer set-up times make it more ideal for large production runs.
Hole Finishing Comparison Chart
REAMING
PULL BORING
HONING
Length
From < 1 ft to > 30 ft
From < .3m to > 9m
From < 6 ft to > 35 ft
From < 1.8m to > 11m
From < 2 ft to > 30 ft
From < .6m to > 9m
ID Tolerance
> 0.125 in
> 3.2mm
+/- 0.030 in
+/- 0.76mm
+ 0.005/-0.000 in
+0.13 mm/-0.00mm
ID RMS
500
250
< 32
ID Range
Up to 13 in
Up to 330mm
2 in plus
.05mm plus
1 in to > 13 in
25mm to > 330mm
Drift
0.002 in / linear in
Nil
—
Contact InformationFor more information, call us at:1-800-375-BORE (2673)(Within the USA)1-281-977-7100(Outside the USA)Or fax us at:1-281-449-8702